83" XL High Side Dump (DC)

Available Lengths

  • 16’

Dare to Compare

Dare To Compare

Financing

Financing

Standard Features

  • 14,000 lb. G.V.W.R.
  • 7,000 lb. x 2 G.A.W.R.
  • Adjustable 2 5/16” Ball Bulldog Coupler
  • Safety Chains
  • 1 - Drop Leg Jack (7,000 lb.)
  • 2 - Dexter E- Z lube Brake Axle (7,000 lb.)
  • 6 Leaf Slipper Spring Suspension
  • 4 - 16” White Spoke Wheels
  • 4 - 235/80R16 Radial Tires (3,520 lb)
  • Electric Breakaway Kit w/ Charger
  • DOT Reflective Tape
  • 1/8” Treadplate Steel Fenders
  • Lockable Toolbox (Houses Battery and Pump)
  • 2 - Way Gate (Barn Doors & Spread Gate)
  • 6’ 6” Slide In Channel Ramps
  • 4 - D-Rings (Welded inside the Box)
  • 40° Dump Pitch
  • 12VDC Hydraulic Pump
  • 5” x 21” West Craft Hyd. Cylinder w/Scissor Lift
  • Scissor Lift
  • 12’ Control Cable
  • Mounting Brackets for Roll-up Tarp
  • 6” Channel Main Frame & Tongue
  • 2” x 6” x 11ga. Tubing Bed Frame
  • 3” Channel Crossmembers 16” on Center
  • 10ga. Steel Bed
  • 83” Wide Bed
  • 10ga. Steel Sides
  • 48” High Sides
  • DOT Approved Flushmount Lifetime LED Lights
  • Sealed Bargman Wire Harness w/ 7-Way RV Plug
  • Stake Pockets
  • Sand Blasted, Acid Washed, Powder Coated
  • Interstate (TM) Deep Cycle Battery
  • 110V Integrated Trickle Charger
  • GN Option Equipped with 2 Jacks
  • GN Equipped w/Lockable Front Toolbox
  • 5 year Dexter Axle Warranty

Notes:
*** MAX GVWR 16,000 ***
*** 6x21 Cylinder Required on Triple Axle (Option -CY06). ***
Bumper Pull Tongue Length (4’ 3”), Gooseneck Length (9’ 2”).

Options

Default options, those included in the base model, are marked by a check .

Coupler Options

[A] BP 2 5/16” Adjustable (14,000 lb.)
[B] BP 2 5/16” Adjustable Rigid Mount (25,000 lb.)
[E] GN 2 5/16” Round (30,000 lb.) w/ 6” Longer Tube
[L] GN Load-Leveling 2 5/16” Square (30,000 lb.)
[P] 3” Pintle Eye - Channel-mount (20,000 lb.)
[R] GN 2 5/16” Round (25,000 lb.)
[S] GN 2 5/16” Square (25,000 lb.)
[T] HD 2 5/16” Adj.3 Bolt Cplr w/6 hole Chn Brkt (25k)

Axle Options

[72BS] (2) 7,000# (Dexter) Electric (Spring)
[72GS] (2) 7,000# (Dexter) Elec/Hyd Drum (1,000 PSI Pump) (Spring)
[73BS] (3) 7,000# (Dexter) Electric (Spring)
[92BS] (2) 7,000# w/235/85R16 LR-G Tires (Dexter) Electric (Spring)
[92GS] (2) 7,000# w/235/85R16 LR-G Tires (Dexter) Elec/Hyd Drum (1,000 PSI Pump) (Spring)
[92JS] (2) 7,000# w/235/85R16 LR-G Tires (Dexter) Electric/Hyd Drum Oil Bath (Spring)
[93BS] (3) 7,000# w/235/85R16 LR-G Tires (Dexter) Electric (Spring)

Tail Options

[S] Split / Spreader Gate
[G] Landscape Gate (No Ramps, No Ramp Pockets)

Color Options

[K] Black Powder Coat
[0] Primer + Black Powder Coat
[1] Primer + Red Powder Coat
[2] Primer + Tractor Green Powder Coat
[3] Primer + White Powder Coat
[4] Primer + Equipment Yellow Powder Coat
[5] Primer + Tractor Orange Powder Coat
[6] Primer + Grey Powder Coat
[8] Primer + Desert Tan Powder Coat
[G] Grey Powder Coat
[J] Tractor Green Powder Coat
[N] Tractor Orange Powder Coat
[P] Primer Only
[R] Red Powder Coat
[T] Desert Tan Powder Coat
[W] White Powder Coat
[Y] Equipment Yellow Powder Coat
[Z] No Paint No Primer

Other Options

[-BTRY] 1 Extra Battery
[-CY06] 6” Cylinder Upgrade
[-DR01] 1 Pair D-Rings
[-FR01] Fork Rack
[-GAS1] Gas Powered Hydraulic Unit
[-JA05] 1 Hydraulic Monster Jack™ Includes Front Toolbox
[-JA06] 2 Hydraulic Monster Jacks™ Includes Front Toolbox
[-JAB1] Upgrade to (1) - Single BULLDOG 10k Jack
[-JAB2] Upgrade to (2) - Dual BULLDOG 10k Jacks (GN Only)
[-RS01] Rear Support Stands
[-RS12] 12” Taller GN Riser
[-SW03] 3ft Tall Sides
[-TB02] Bumper Pull Double Deck Toolbox (Upgrade)
[-TB03] Top Riser Toolbox
[-TB24] Side-mount Toolbox 24”
[-TB36] Side-mount Toolbox 36”
[0] Cold Weather Wiring Harness (7-Way RV)
[3] Upgrade to Single 10k Jack (Bumper Pull)
[5] Solar Battery Charger
[6] 6” Taller GN Riser
[8] Full Size Divided Toolbox Upgrade (BP Only)
[9] 9,900 G.V.W.R.
[C] 12”oc Crossmembers
[E] Power Up/Down & Gravity Down Upgrade
[H] HD 24” Side Extensions 10ga
[M] Mount Only for Spare Tire
[P] Tarp kit (Pull Bar)
[T] Spare Tire and Mount (Bumper Pull)
[U] Deck on the Neck (102” Wide 96” Long)
[X] Bulldog 2-speed Jacks (12,000 lb.)
[Y] 24” Side Extensions (Solid)
[Z] Grain Chute

Parts Guide

Model Part Description Category Part Number
DC Dexter Axle Electric 70865E-ST-EZ 95 x 80 AXLE ASSEMBLIES 110171
DC Reflector Tape, Conspicuity R&W BODY 170237
DC Coupler,14K 2-5/16” Adj. BULLDOG COUPLER 140201
DC Fender Tandem Steel DP FENDER 160604
DC Bracket Weld-on - 3/8” Safety Chain
(gooseneck)
HARDWARE 180411
DC Bracket Weld-on 5/16” Safety Chain
(bumperpull)
HARDWARE 180410
DC Cylinder, 6”x16”x2” for D9 HYDRAULIC 190223
DC Pump Dual Action KTI w/Remote HYDRAULIC 190601
DC Pump Triple  Action KTI w/Remote
(POWER UP/DOWN & GRAVITY DOWN OPTION)
HYDRAULIC 190604
DC Scissor Lift No Cyl. New D9 DJ HYDRAULIC 190224
DC Toolbox  BP Dump w/Holes
(Bumper Pull)
HYDRAULIC 160301
DC Jack 12K Dropleg SW GN
(Gooseneck)
JACK 140102
DC Jack, 7K Dropleg Square Topwind
(Bumper pull)
JACK 140101
DC Light Kit LED - D6 D7 LIGHTING 170505
DC Ramp 3” channel 16”x77” (Dump)slide-in
(April 2014 & Later)
RAMPS 160009
DC Bolt Equal’r 7/8”x4.75” Slipper 7K SUSPENSION 120119
DC Bolt, Hanger 9/16x3.5” Slipper 7K SUSPENSION 120118
DC Equalizer 7K  QRG (12”) SUSPENSION 120216
DC Hanger Center 7K Slipper SUSPENSION 120115
DC Hanger Front 7K Slipper SUSPENSION 120116
DC Hanger Kit Triple Axle Slipper 7K SUSPENSION 120113
DC Hanger Kt Tandem Axle Slipper 52/7k SUSPENSION 120112
DC Hanger Rear 7K Slipper SUSPENSION 120117
DC Lock Nut for 7K Eq Bolt 7/8” SUSPENSION 120218
DC Lock Nut for hanger bolt 9/16” SUSPENSION 120311
DC Spring Slipper 6 leaf 4000# 7/8K SUSPENSION 120102
DC U-Bolt Kit 3” Rd. for 5.2-7K SUSPENSION 120301
DC Repl’ Roller For Mountain Tarp Kit TARP 160460
DC Tarp Bracket L.H.Alum.Side Mount
(Driver Side)
TARP 160407
DC Tarp Bracket R.H.Alum.Side Mount
(Passenger Side)
TARP 160408
DC Tarp Kit Handle Lock Bracket TARP 160411
DC Tarp Replacement Mesh 84”x 22’ TARP 160426
DC 16” White Spoke Wheels w/ 8 on 6.5”
(7000 lb axle)
TIRES & WHEELS 130303

Parts Guide Disclaimer: Parts can change based on the options, production date, and production location of the trailer. If there is any doubt about parts fitment please contact a PJ Parts representative with the VIN of the trailer in question.