83" High Side Dump (DH)

Available Lengths

  • 10’
  • 12’
  • 14’

Dare to Compare

Dare To Compare

Financing

Financing

Standard Features

  • 14,000 lb. G.V.W.R.
  • 7,000 lb. x 2 G.A.W.R.
  • 2 5/16” Ball Adjustable Bulldog Coupler
  • Safety Chains
  • 1 - Top Wind Drop Leg Jack (8,000 lb.)
  • 2 - Dexter E-Z Lube Brake Axles (7,000 lb.)
  • 6 Leaf Slipper Spring Suspension
  • 4 - 16” White Spoke Wheels
  • 4 - 235/80R16 Radial Tires (3,520 lb.)
  • Defender II Electric Breakaway Kit w/ Charger
  • 3M DOT Reflective Tape
  • 1/8” Treadplate Steel Fenders
  • Lockable Toolbox (Houses Battery and Pump)
  • 2 - Way Gate (Barn Doors & Spreader Gate)
  • 6’ 6” Slide In Channel Ramps
  • 4 - D-Rings (Welded inside the Box)
  • 40° Dump Pitch
  • 12VDC KTI Hydraulic Pump
  • 5” x 17” West Craft Hyd. Cylinder w/Scissor Lift
  • 12’ Control Cable
  • Mounting Brackets for Roll-up Tarp
  • 6” Channel Main Frame & Tongue
  • 2” x 6” x 11ga. Tubing Bed Frame
  • 3” Channel Crossmembers 16” on Center
  • 10ga. HD Steel Bed
  • 83” Extra Wide Bed
  • 10ga. HD Steel Sides
  • 48” High Sides (36” Available)
  • Optronics Flushmount Lifetime LED Lights
  • Bargman Sealed Wire Harness w/ 7-Way RV Plug
  • Stake Pockets for Extensions
  • Sand Blasted, Acid Washed, Powder Coated
  • Interstate (TM) Deep Cycle Battery
  • 110V Integrated Trickle Charger
  • GN Option Equipped with 2 -10k Jacks
  • GN Option Equipped with Front Toolbox
  • 5 year Dexter Axle Warranty

Notes:
10’ has 10.25 cubic yards capacity, 12’ has 12.30 cubic yards capacity, 14’ has 14.33 cubic yards capacity.
*** MAX GVWR 16,000 with 16k+ Rated Coupler. ***
Bumperpull Tongue Length (4’ 2”).

Options

Default options, those included in the base model, are marked by a check .

Coupler Options

[A] BP 2 5/16” Adjustable (14,000 lb.)
[B] BP 2 5/16” Adjustable Rigid Mount (25,000 lb.)
[E] GN 2 5/16” Round (30,000 lb.) w/ 6” Longer Tube
[L] GN Load-Leveling 2 5/16” Square (30,000 lb.)
[P] 3” Pintle Eye - Channel-mount (20,000 lb.)
[R] GN 2 5/16” Round (25,000 lb.)
[S] GN 2 5/16” Square (25,000 lb.)
[T] HD 2 5/16” Adj.3 Bolt Cplr w/6 hole Chn Brkt (25k)

Axle Options

[72BS] (2) 7,000# (Dexter) Electric (Spring)
[72GS] (2) 7,000# (Dexter) Elec/Hyd Drum (1,000 PSI Pump) (Spring)
[72SS] (2) 7,000# (Dexter) Surge Hydraulic Drum [Surge Coupler] (Spring)
[92BS] (2) 7,000# w/235/85R16 LR-G Tires (Dexter) Electric (Spring)
[92GS] (2) 7,000# w/235/85R16 LR-G Tires (Dexter) Elec/Hyd Drum (1,000 PSI Pump) (Spring)

Tail Options

[S] Split / Spreader Gate

Color Options

[K] Black Powder Coat
[0] Primer + Black Powder Coat
[1] Primer + Red Powder Coat
[2] Primer + Tractor Green Powder Coat
[3] Primer + White Powder Coat
[4] Primer + Equipment Yellow Powder Coat
[5] Primer + Tractor Orange Powder Coat
[6] Primer + Grey Powder Coat
[8] Primer + Desert Tan Powder Coat
[G] Grey Powder Coat
[J] Tractor Green Powder Coat
[N] Tractor Orange Powder Coat
[P] Primer Only
[R] Red Powder Coat
[T] Desert Tan Powder Coat
[W] White Powder Coat
[Y] Equipment Yellow Powder Coat
[Z] No Paint No Primer

Other Options

[-DR01] 1 Pair D-Rings
[-JA06] 2 Hydraulic Monster Jacks™ Includes Front Toolbox
[-RS01] Rear Support Stands
[-SW03] 3ft Tall Sides
[0] Cold Weather Wiring Harness (7-Way RV)
[8] Full Size Divided Toolbox Upgrade (BP Only)
[C] 12”oc Crossmembers
[D] 1 Extra Pair of D-Rings
[E] Power Up/Down & Gravity Down Upgrade
[H] HD 24” Side Extensions 10ga
[M] Mount Only for Spare Tire
[P] Tarp kit(Pull Bar)7x20ft
[T] Spare Tire and Mount (Bumper Pull)
[U] Deck on the Neck (GN Only)
[V] 24” Side Extensions (Expanded Metal)
[X] Bulldog 2-speed Jacks (12,000 lb.)
[Y] 24” Side Extensions (Solid)
[Z] Grain Chute

Parts Guide

Model Part Description Category Part Number
DH Dexter Axle Electric 70865E-ST-EZ 95 x 80 AXLE ASSEMBLIES 110171
DH Reflector Tape, Conspicuity R&W BODY 170237
DH Coupler,14K 2-5/16” Adj. BULLDOG COUPLER 140201
DH Fender Tandem Steel DP FENDER 160604
DH Bracket Weld-on - 3/8” Safety Chain HARDWARE 180411
DH Bracket Weld-on 5/16” Safety Chain HARDWARE 180410
DH Cylinder 5”x17”x2” D6,7,8 w/scissor HYDRAULIC 190205
DH Cylinder 5”x30”x2” - D6& & W/O scis
(Without Scissor)
HYDRAULIC 190206
DH Pump Dual Action KTI w/Remote HYDRAULIC 190601
DH Pump Triple  Action KTI w/Remote
(POWER UP/DOWN & GRAVITY DOWN OPTION)
HYDRAULIC 190604
DH Scissor Lift Hoist - D7 HYDRAULIC 190208
DH Toolbox  BP Dump w/Holes HYDRAULIC 160301
DH Jack 12K Dropleg SW GN JACK 140102
DH Jack, 7K Dropleg Square Topwind JACK 140101
DH Light Kit LED - D6 D7 LIGHTING 170505
DH Ramp 3” channel 16”x77” (Dump)slide-in
(April 2014 & Later)
RAMPS 160009
DH Bolt Equal’r 7/8”x4.75” Slipper 7K SUSPENSION 120119
DH Bolt, Hanger 9/16x3.5” Slipper 7K SUSPENSION 120118
DH Hanger Center 7K Slipper SUSPENSION 120115
DH Hanger Front 7K Slipper SUSPENSION 120116
DH Hanger Kt Tandem Axle Slipper 52/7k SUSPENSION 120112
DH Hanger Rear 7K Slipper SUSPENSION 120117
DH Lock Nut for 7K Eq Bolt 7/8” SUSPENSION 120218
DH Lock Nut for hanger bolt 9/16” SUSPENSION 120311
DH Spring Slipper 6 leaf 4000# 7/8K SUSPENSION 120102
DH U-Bolt Kit 3” Rd. for 5.2-7K SUSPENSION 120301
DH Tarp Kit 84in. x 20ft. Buyers TARP 160475
DH Tarp Replacement Mesh 84”x18’ TARP 160405
DH Tarp Replacement Vinyl 84”x18’
(Vinyl)
TARP 160428
DH 16” White Spoke Wheels w/ 8 on 6.5”
(7000 lb axle)
TIRES & WHEELS 130303

Parts Guide Disclaimer: Parts can change based on the options, production date, and production location of the trailer. If there is any doubt about parts fitment please contact a PJ Parts representative with the VIN of the trailer in question.