PJ Trailers
Navigation
PJ Trailers Parts

Utility Trailers




Why should you buy a PJ utility trailer?


PJ utility trailers are loaded with great features and benefits. Our utility trailer comparison checklist is a great resource that highlights over 20 features of our trailers.

Single Axle

Channel Frame

60" Wide Utility

(U6)

77" Wide Utility

(U7)

83" Wide Utility

(U8)

60" All Steel Utility

(A6)
   


Tandem Axle

Channel Frame

77" Wide Utility

(U7)

83" Wide Utility

(U8)

77" Wide Solid Sides

(U7)

Utility Trailer Comparison Checklist


Using our checklist you can quickly compare the features of a PJ utility trailer to other brands. You may even want to print this checklist and take it trailer shopping to see how other ulitities compare to PJ utility trailer.
Feature PJ Trailers Other Guys
3 Year Frame/1 Year Limited Warranty
All PJ utility trailers with a model year of 2010 or later receive a 3 year frame warranty and a 1 year limited warranty.

1 year warranty
3/16" Angle Cross-members
Our 3/16" angle cross-members are much stronger than the more commonly used 1/8" angle. They will withstand heavier loads and extend the life of your trailer.

1/8" angle
4" Channel Frame Standard
Our single and tandem axle utilities receive a 4" channel frame standard. A c-channel frame is significantly stronger than the angle frames most manufacturers use.

3" x 2" angle frame
4" Channel Tongue Standard
We use 4" c-channel frame for the tongue on all PJ utility trailers. This ensures a great pulling trailer that can take years of heavy use.

3" channel
Aluminum Removable Fenders
Not only do our aluminum diamond plate fenders look great, they reduce the overall weight of the trailer. They can also be removed with bolts for off-road use or easy replacement.

rolled steel not removable
Board Caps for Deck
Each deck board is installed under a board cap (the front and rear bumper). This keeps the ends of the board from "curling" and lifting from the frame.

No board caps
Bulldog™ Coupler
Each PJ utility trailer receives 2" or 2 5/16" Bulldog™ coupler depending on the axle rating. The Bulldog™ coupler has a well-earned reputation for being the toughest, most durable coupler in the trailer industry.

cheap A-frame coupler
Bulldog™ Jack
We equip every PJ utility with a swivel-mount Bulldog™ jack. These zinc coated jacks are set back in the tongue so they do not interfere with your truck tail gate. They can also be quickly flipped up and down, saving you time and energy when compared to a traditional a-frame jack.

cheap A-frame jack
Canadian Spruce Pine Fir Lumber
We use Canadian spruce pine fir lumber our utility trailers. SPF is known for not only its strength but good looks and durability.

untreated
Entire Frame Powder Coated
We encourage you to take a look under our utility trailers and you will see a frame that is completely powder coated. Many manufactures don't paint the underside of their trailers or paint the trailer after the deck has been installed. Unpainted surfaces allow for rapid corrosion and rust on the trailer frame.

no paint on underside
Flush Mount Lights
One of the most common complaints with other utility trailers is users damaging their surfaced mounted lights. This is why we flush mount our lights on all of our utility trailers. Having the lights mounted in grommets inside the frame protects them from damage & debris, keeping your trailer legal and safe.
Heavy Gauge Expanded Metal Gates
Our utility trailer gates use 11 gauge expanded metal for additional strength and to help reduce sag between cross-members.

light expanded metal
NATM Compliant
Our utility trailers are built in compliance with the National Association of Trailer Manufacturers trailer safety regulations. Be very wary of any manufacturer that does not comply with NATM safety standards.
Posi-lube Powder Coated Axles
Posi-lube axles makes axle maintenance extremely easy. You can repack your bearings by simply injecting grease with a manual grease gun (not an air grease gun). Our axles are also powder coated for increased durability over the life of the trailer.
Powder Coated
Powder coat is regarded as far superior to conventional liquid paint. Powder coat is more durable and lasts longer that liquid paint while still providing a high gloss finish. It is also much more environmentally friendly than traditional paint since it emits virtually no VOCs and "overspray" can be recycled.

liquid paint
Radial Tires
Radial tires are superior to bias ply tires in many ways. Radial tires feature better fuel economy, less vibration, a softer ride, and extended life due to less heat being generated by the tire.

bias ply tires
Removable Sides (Rails & Uprights)
Want to remove the sides of the utility trailer for a bulky load? All PJ Utility trailers feature sides that can be removed by unbolting them from the frame.

sides are not removable
Sand Blasted & Acid Washed
Our trailers are blasted with steel shot to remove surface contaminants and mill scale from the steel. The trailer is then acid washed to remove any micro contaminants that sandblasting didn't remove. The trailer is then rinsed and dried, giving the powder coat a clean surface to adhere to.
Sealed Wiring Harness Inside Steel Conduit
We know trailer wiring issues are one of the top complaints for most utility trailer owners. That is why we use a sealed wiring harness to protect our wiring from water, dirt, and corrosion. This harness is enclosed in steel conduit throughout the frame of the trailer, to further protect the wiring from ice, road debris, and physical damage. This modular harness means each light is just simply plugged in, making replacement very easy.

not available
Spring Assist Gates
Every PJ utility gate has spring assist standard. Spring assist gates take all of the strain out of lifting and lower a utility trailer gate. Many other manufacturers don't include this spring assist feature making the use of the gate quite a chore.

extra charge
Spring Loaded Gate Latches
Our "J hook" gate latches are spring loaded and just need to be lifted to unlatch the gate. This means you will never have to try to keep up with loose lynch pins while you load your trailer.

loose lynch pins
Tube Frame Gates
We build the outside frame of every PJ utility gate out of 2" x 2" square tubing. This makes the gate much more rigid and durable when compared to an angle frame gate. Angle frame gates have a tendency to twist and warp, leading to premature failure of the gate. Also, each gate has handles on both sides making it even easier to raise and lower, without a chance of pinching your fingers.

light angle
Wrap Tongue
Whether it is a single or tandem axle, all PJ channel utilities feature a wrap tongue. This means the tongue is extended to the front of the fender, significantly increasing the strength and rigidity of the entire frame.

tongue stops at 1st cross-member


 
© 2014 - www.pjtrailers.com | Dump Trailers | Equipment Trailers | Gooseneck Trailers | Tilt Trailers | Utility Trailers | Contact Us
Official PJ Trailers Facebook Official Twitter of PJ Trailers Official PJ Trailers Blog Official PJ Trailers YouTube Channel
Home Trailers Options Dealer Finder Support Videos News About Us Dealer Tools PJ Trailers YouTube Channel PJ Trailers Twitter PJ Trailers Facebook PJ Trailers Wordpress Blog PJ Trailers PJ Trailers