83" Low Pro Dump (DL)

Available Lengths

  • 12’
  • 14’
  • 16’

Dare to Compare

Dare To Compare

Financing

Financing

Standard Features

  • 14,000 lb. G.V.W.R.
  • 7,000 lb. x 2 G.A.W.R.
  • Adjustable 2 5/16” Ball Bulldog Coupler
  • Safety Chains
  • 1 - Drop Leg Jack (7,000 lb.)
  • 2 - Dexter E- Z lube Brake Axle (7,000 lb.)
  • 6 Leaf Slipper Spring Suspension
  • 4 - 16” White Spoke Wheels
  • 4 - 235/80R16 Radial Tires (3,520 lb)
  • Electric Breakaway Kit w/ Charger
  • DOT Reflective Tape
  • 1/8” Treadplate Steel Fenders
  • Lockable Toolbox (Houses Battery and Pump)
  • 2 - Way Gate (Barn Doors & Spread Gate)
  • 6’ 6” Slide In Channel Ramps
  • 4 - D-Rings (Welded inside the Box)
  • 40° Dump Pitch
  • 12VDC Hydraulic Pump
  • 5”x17” Hyd.Cylinder w/Scissor & 5”x 21” on 16’
  • Scissor Lift
  • 12’ Control Cable
  • Mounting Brackets for Roll-up Tarp
  • 8” x 10 lb. I-Beam Frame & Tongue
  • 3” Channel Crossmembers 16” on Center
  • 10ga. Steel Bed
  • 83” Wide Bed
  • 10ga. Steel Sides
  • 24” High Sides
  • DOT Approved Flushmount Lifetime LED Lights
  • Sealed Bargman Wire Harness w/ 7-Way RV Plug
  • Stake Pockets
  • Sand Blasted, Acid Washed, Powder Coated
  • Interstate (TM) Deep Cycle Battery
  • Ultra Low 24”- 28” Deck Height
  • 110V Integrated Trickle Charger
  • GN Option Equipped with 2 Jacks
  • GN Equipped w/Lockable Front Toolbox
  • 5 year Dexter Axle Warranty

Notes:
***Triple Axle Options Only on 16’Length***
*** 6x21 Cylinder Required on Triple Axle (Option -CY06). ***
*** MAX GVWR 16,000 with 8k Axle Option and 16k+ Rated Coupler. ***
Bumper Pull Tongue Length (4’ 10”), Gooseneck Length (9’ 2”).
***8k axle will raise deck height on this model by 5” ***


Estimated Weights

Length Axles Est. Base Weight
12' 2 x 7,000 lbs 3,880 lbs / 1,760 kg
14' 2 x 7,000 lbs 4,340 lbs / 1,969 kg
14' Gooseneck 2 x 7,000 lbs 4,940 lbs / 2,241 kg
16' 2 x 7,000 lbs 4,665 lbs / 2,116 kg
† Weights are estimated for base trailer only. We make no guarantee regarding the accuracy of estimated weights.

Options

Default options, those included in the base model, are marked by a check .

Coupler Options

[A] BP 2 5/16” Adjustable (14,000 lb.)
[E] GN 2 5/16” Round (30,000 lb.) w/ 6” Longer Tube
[P] 3” Pintle Eye - Channel-mount (20,000 lb.)
[R] GN 2 5/16” Round (25,000 lb.)
[S] GN 2 5/16” Square (25,000 lb.)
[T] HD 2 5/16” Adj.3 Bolt Cplr w/6 hole Chn Brkt (20k)

Axle Options

[72BD] (2) 7,000# (Dexter) Electric (Drop Axle)
[72BS] (2) 7,000# (Dexter) Electric (Spring)
[Y2BS] (2) 7,000# w/215/75R17.5 LR-H Singles (Dexter) Electric (Spring)
[Y2HS] (2) 7,000# w/215/75R17.5 LR-H Singles (Dexter) Elec/Hyd Disc (1,600 PSI Pump) (Spring)
[92BD] (2) 7,000# w/235/85R16 LR-G Tires (Dexter) Electric (Drop Axle)
[92BS] (2) 7,000# w/235/85R16 LR-G Tires (Dexter) Electric (Spring)
[82BS] (2) 8,000# Oil Bath w/235/85R16 LR-G Tires (Dexter) Electric (Spring)

Tail Options

[S] Split / Spreader Gate

Color Options

[K] Black Powder Coat
[0] Primer + Black Powder Coat
[1] Primer + Red Powder Coat
[3] Primer + White Powder Coat
[5] Primer + Tractor Orange Powder Coat
[6] Primer + Grey Powder Coat
[8] Primer + Desert Tan Powder Coat
[G] Grey Powder Coat
[N] Tractor Orange Powder Coat
[P] Primer Only
[R] Red Powder Coat
[T] Desert Tan Powder Coat
[W] White Powder Coat
[Z] No Paint No Primer

Other Options

[-BTRY] 1 Extra Battery
[-DON1] Removable Deck on the Neck (102” Wide 96” Long)
[-DR01] 1 Pair D-Rings
[-FR01] Fork Rack
[-JA05] 1 Hydraulic Monster Jack™ Includes Front Toolbox
[-RS01] Rear Support Stands
[-SP02] Spare Tire & Mount (Bumper Pull) G Rated
[-SP08] 215/75/R17.5 (H) 8k Axle Spare Tire and Mount
[-ST05] Spare Tire and Mount (BP) 215/75/R17.5
[-SW07] 7 Gauge Solid Metal Sides & Floor
[-TB03] Top Riser Toolbox
[0] Cold Weather Wiring Harness (7-Way RV)
[3] Upgrade to Single 10k Jack (Bumper Pull)
[5] Solar Battery Charger
[6] 6” Taller GN Riser
[8] Full Size Divided Toolbox Upgrade (BP Only)
[9] 9,990 G.V.W.R.
[C] 12”oc Crossmembers
[E] Power Up/Down & Gravity Down Upgrade
[H] HD 24” Side Extensions 10ga
[M] Mount Only for Spare Tire
[P] Tarp kit(Pull Bar)7x20ft
[T] Spare Tire and Mount (Bumper Pull)
[V] 24” Side Extensions (Expanded Metal)
[X] Bulldog 2-speed Jacks (12,000 lb.)
[Y] 24” Side Extensions (Solid)

Parts Guide

Model Part Description Category Part Number
DL Reflector Tape, Conspicuity R&W BODY 170237
DL Coupler,14K 2-5/16” Adj. BULLDOG COUPLER 140201
DL Fender Tandem Steel DP FENDER 160604
DL Bracket Weld-on - 3/8” Safety Chain HARDWARE 180411
DL Bracket Weld-on 5/16” Safety Chain HARDWARE 180410
DL Cylinder 5”x17”x2” D6,7,8 w/scissor
(Scissor)
HYDRAULIC 190205
DL Pump Dual Action KTI w/Remote HYDRAULIC 190601
DL Pump Tripleæ Action KTI w/Remote
(POWER UP/DOWN & GRAVITY DOWN OPTION)
HYDRAULIC 190604
DL Scissor Lift Hoist - D7
(with scissor option)
HYDRAULIC 190208
DL Toolboxæ BP Dump w/Holes
(Bumper Pull)
HYDRAULIC 160301
DL Jack 12K Dropleg SW GN
(Gooseneck)
JACK 140102
DL Jack, 7K Dropleg Square Topwind
(Bumper pull)
JACK 140101
DL Light Kit LED - D6 D7 LIGHTING 170505
DL Ramp 3” channel 16”x77” (Dump)slide-in
(April 2014 & Later)
RAMPS 160009
DL Bolt, Equalizer, 7/8”x4.75” Slipper 7K
(with 5.2k axles)
SUSPENSION 120119
DL Bolt, Hanger 9/16x3.5” Slipper 7K
(with 5.2k axles)
SUSPENSION 120118
DL Equalizer 7Kæ QRG (12”)
(5200 lb axles)
SUSPENSION 120216
DL Hanger Center 7K Slipper
(5200 lb axles)
SUSPENSION 120115
DL Hanger Front 7K Slipper
(5200 lb axles)
SUSPENSION 120116
DL Hanger Kt Tandem Axle Slipper 52/7k
(5200 lb axles)
SUSPENSION 120112
DL Hanger Rear 7K Slipper
(5200 lb axles)
SUSPENSION 120117
DL Lock Nut for 7K Eq Bolt 7/8”
(with 5.2k axles)
SUSPENSION 120218
DL Lock Nut for hanger bolt 9/16” SUSPENSION 120311
DL Spring Slipper 6 leaf 4000# 7/8K SUSPENSION 120102
DL U-Bolt Kit 3” Rd. for 5.2-7K
(5200 lb axles)
SUSPENSION 120301
DL Tarp Kit 84ft x 18ft Vinyl w/Grommets
(Vinyl)
TARP 160424
DL Tarp Replacement Mesh 84in x 18ft TARP 160405
DL Tarp Replacement Vinyl 84in x 18ft
(Vinyl)
TARP 160428
DL 16” White Spoke Wheels w/ 8 on 6.5”
(7000 lb axle)
TIRES & WHEELS 130303

Parts Guide Disclaimer: Parts can change based on the options, production date, and production location of the trailer. If there is any doubt about parts fitment please contact a PJ Parts representative with the VIN of the trailer in question.