10" I-Beam Deckover Dump (DT)

Available Lengths

  • 14’
  • 16’

Dare to Compare

Dare To Compare

Financing

Financing

Standard Features

  • 14,000 lb. G.V.W.R.
  • 7,000 lb. x 2 G.A.W.R.
  • Adjustable 2 5/16” Ball Bulldog Coupler
  • Safety Chains
  • 1 - Drop Leg Jack (7,000 lb.)
  • 2 - Dexter E- Z lube Brake Axle (7,000 lb.)
  • 6 Leaf Slipper Spring Suspension
  • 4 - 16” White Spoke Wheels
  • 4 - 235/80R16 Radial Tires (3,520 lb)
  • Electric Breakaway Kit w/ Charger
  • DOT Reflective Tape
  • Lockable Toolbox (Houses Battery and Pump)
  • 2 - Way Gate (Barn Doors & Spread Gate)
  • 80” Slide In Channel Ramps
  • 4 - D-Rings
  • 40° Dump Pitch
  • 12VDC Hydraulic Pump
  • 5” x 21” Hyd. Cylinder w/Scissor Lift
  • 12’ Control Cable
  • 10” I-Beam Tongue
  • Mounting Brackets for Roll-up Tarp
  • 10” I-Beam Main Frame
  • 10ga. Fabricated Bed Frame
  • 3” Channel Crossmembers 16” on Center
  • 2” x 6” x 11ga. Tubing Outer Bed Frame
  • 10ga. Steel Bed
  • 96” Wide Bed
  • 10ga. Steel Sides
  • 19” High Fold Down Sides
  • DOT Approved Flushmount Lifetime LED Lights
  • Sealed Bargman Wire Harness w/ 7-Way RV Plug
  • Sand Blasted, Acid Washed, Powder Coated
  • Interstate (TM) Deep Cycle Battery
  • 110V Integrated Trickle Charger
  • GN Option Equipped with 2 Jacks
  • GN Equipped w/Lockable Front Toolbox
  • 5 year Dexter Axle Warranty

Estimated Weights

Length Axles Est. Base Weight
14' 2 x 7,000 lbs 3,940 lbs / 1,787 kg
16' 2 x 7,000 lbs 4,300 lbs / 1,950 kg
† Weights are estimated for base trailer only. We make no guarantee regarding the accuracy of estimated weights.

Options

Default options, those included in the base model, are marked by a check .

Coupler Options

[A] BP 2 5/16” Adjustable (14,000 lb.)
[P] 3” Pintle Eye - Channel-mount (20,000 lb.)
[R] GN 2 5/16” Round (25,000 lb.)
[S] GN 2 5/16” Square (25,000 lb.)
[T] HD 2 5/16” Adj.3 Bolt Cplr w/6 hole Chn Brkt (20k)

Axle Options

[72BS] (2) 7,000# (Dexter) Electric (Spring)
[92BS] (2) 7,000# w/235/85R16 LR-G Tires (Dexter) Electric (Spring)
[K2BS] (2) 8,000# Oil Bath w/215/75R17.5 LR-H Singles(Dexter) Electric (Spring)
[82BS] (2) 8,000# Oil Bath w/235/85R16 LR-G Tires (Dexter) Electric (Spring)

Tail Options

[S] Split / Spreader Gate

Color Options

[K] Black Powder Coat
[0] Primer + Black Powder Coat
[1] Primer + Red Powder Coat
[3] Primer + White Powder Coat
[5] Primer + Tractor Orange Powder Coat
[6] Primer + Grey Powder Coat
[8] Primer + Desert Tan Powder Coat
[G] Grey Powder Coat
[N] Tractor Orange Powder Coat
[P] Primer Only
[R] Red Powder Coat
[T] Desert Tan Powder Coat
[W] White Powder Coat
[Z] No Paint No Primer

Other Options

[-DR01] 1 Pair D-Rings
[-TB03] Top Riser Toolbox
[0] Cold Weather Wiring Harness (7-Way RV)
[3] Upgrade to Single 10k Jack (Bumper Pull)
[5] Solar Battery Charger
[6] 6” Taller GN Riser
[9] 9,990 G.V.W.R.
[C] 12”oc Crossmembers
[E] Power Up/Down & Gravity Down Upgrade
[M] Mount Only for Spare Tire (Under Frame)
[P] Tarp kit (Pull Bar) 8 x 18ft
[T] Spare Tire and Mount (Bumper Pull) (Under Frame)
[X] Bulldog 2-speed Jacks (12,000 lb.)

Parts Guide

Model Part Description Category Part Number
DT 7,000# Electric / Spring
(Axle Brake 70865E-ST-EZ 73x58)
AXLE 110120
DT Reflector Tape, Conspicuity R&W BODY 170237
DT Coupler,14K 2-5/16” Adj. BULLDOG COUPLER 140201
DT Bracket Weld-on - 3/8” Safety Chain HARDWARE 180411
DT Bracket Weld-on 5/16” Safety Chain HARDWARE 180410
DT Cylinder 5”x17”x2” D6,7,8 w/scissor
(Scissor)
HYDRAULIC 190205
DT Cylinder, 6”x16”x2” for D9 HYDRAULIC 190223
DT Pump Dual Action KTI w/Remote HYDRAULIC 190601
DT Pump Tripleæ Action KTI w/Remote
(POWER UP/DOWN & GRAVITY DOWN OPTION)
HYDRAULIC 190604
DT Scissor Lift Hoist - D7
(with scissor option)
HYDRAULIC 190208
DT Scissor Lift No Cyl. New D9 DJ HYDRAULIC 190224
DT Toolboxæ BP Dump w/Holes
(Bumper Pull)
HYDRAULIC 160301
DT Jack 12K Dropleg SW GN
(Gooseneck)
JACK 140102
DT Jack, 7K Dropleg Square Topwind
(Bumper pull)
JACK 140101
DT Light Pkg - D8
(Incandescent)
LIGHTING 170108
DT Light Pkg LED - D8
(LED)
LIGHTING 170109
DT Ramp 3” channel 16”x77” (Dump)slide-in
(April 2014 & Later)
RAMPS 160009
DT Bolt, Equalizer, 7/8”x4.75” Slipper 7K
(with 5.2k axles)
SUSPENSION 120119
DT Bolt, Hanger 9/16x3.5” Slipper 7K
(with 5.2k axles)
SUSPENSION 120118
DT Equalizer 7Kæ QRG (12”)
(5200 lb axles)
SUSPENSION 120216
DT Hanger Center 7K Slipper
(5200 lb axles)
SUSPENSION 120115
DT Hanger Front 7K Slipper
(5200 lb axles)
SUSPENSION 120116
DT Hanger Kt Tandem Axle Slipper 52/7k
(5200 lb axles)
SUSPENSION 120112
DT Hanger Rear 7K Slipper
(5200 lb axles)
SUSPENSION 120117
DT Lock Nut for 7K Eq Bolt 7/8”
(with 5.2k axles)
SUSPENSION 120218
DT Lock Nut for hanger bolt 9/16” SUSPENSION 120311
DT Spring Slipper 6 leaf 4000# 7/8K SUSPENSION 120102
DT U-Bolt Kit 3” Rd. for 5.2-7K
(5200 lb axles)
SUSPENSION 120301
DT Replacement Roller For Mountain Tarp Kit TARP 160460
DT Tarp Bracket L.H.Alum.Side Mount
(Driver Side)
TARP 160407
DT Tarp Bracket R.H.Alum.Side Mount
(Passenger Side)
TARP 160408
DT Tarp Kit 96in x 18ft Pull Bar w/Mesh D8 TARP 160413
DT Tarp Kit Handle Lock Bracket TARP 160411
DT Tarp Replacement Mesh 96in x 18ft TARP 160432
DT 16” White Spoke Wheels w/ 8 on 6.5”
(7000 lb axle)
TIRES & WHEELS 130303

Parts Guide Disclaimer: Parts can change based on the options, production date, and production location of the trailer. If there is any doubt about parts fitment please contact a PJ Parts representative with the VIN of the trailer in question.