10" Pro-Beam Super-Wide Equip (H7)

Available Lengths

  • 20’
  • 22’
  • 24’
  • 26’
  • 28’
  • 30’
  • 32’

Dare to Compare

Dare To Compare

Financing

Financing

Standard Features

  • 20,000 lb. G.V.W.R.
  • 10,000 lb. x 2 G.A.W.R.
  • 3” Pintle Eye Face Mount Coupler
  • Safety Chains
  • 1 - Drop Leg Jack (10,000 lb.)
  • 2 - Dexter Oil Bath Axles (10,000 lb.)
  • Torsion Suspension
  • 4 - 17.5” Grey Wheels
  • 235/75/R17.5 LR-J 8-hole SINGLE
  • Rubrail w/ Stake Pockets
  • Electric Breakaway Kit w/ Charger
  • HD Drive Over 1/4” Diamond Plate Fenders
  • 5’ Channel Ramps w/ Holder
  • Dual Bulldog Rear Support Jacks
  • 10” x 19 lb. I-Beam Main Frame & Tongue
  • 3” Channel Crossmembers 16” on Center
  • 2” Treated Pine Lumber Deck
  • 102” Wide Deck
  • DOT Approved Flushmount Lifetime LED Lights
  • Sealed Bargman Wire Harness w/ 7-Way RV Plug
  • Sand Blasted, Acid Washed, Powder Coated
  • Tool Tray In Tongue
  • GN Option Equipped with 2 Jacks
  • GN Equipped w/Lockable Front Toolbox
  • 5 year Dexter Axle Warranty

Options

Default options, those included in the base model, are marked by a check .

Coupler Options

[P] 3” Pintle Eye - Face-mount (36,000 lb.)
[B] BP 2 5/16” Adj Rigid Mount (25,000 lb.)
[R] GN 2 5/16” Round (25,000 lb.) w/ Toolbox
[S] GN 2 5/16” Square (25,000 lb.) w/ Toolbox

Axle Options

[S2BT] (2) 10,000# w/235/75R17.5" LR-J Single T&W (Dexter) Electric (Torsion)

Tail Options

[S] Straight Deck w/ 5’ Rear Slide-in Ramps
[5] 3.5’ Dovetail w/2 Monster Ramps
[D] 2’ Dovetail w/ 31x66 HD Fold-up Ramps

Color Options

[K] Black Powder Coat
[0] Primer + Black Powder Coat
[1] Primer + Red Powder Coat
[3] Primer + White Powder Coat
[5] Primer + Tractor Orange Powder Coat
[6] Primer + Grey Powder Coat
[8] Primer + Desert Tan Powder Coat
[G] Grey Powder Coat
[N] Tractor Orange Powder Coat
[P] Primer Only
[R] Red Powder Coat
[T] Desert Tan Powder Coat
[W] White Powder Coat
[Z] No Paint No Primer

Other Options

[-BW03] Add BlackWood Pro to Dovetail
[-BWPF] Blackwood Pro Full Deck
[-BWPO] Blackwood Pro Outer Deck
[-DM01] 1 Extra Pair Flushmount D-Rings on Steel Floor
[-DON1] Removable Deck on the Neck (102” Wide 96” Long)
[-DP01] Add 11ga Diamond Plate to Top of Slide in Ramps
[-DR01] 1 Pair D-Rings
[-DS05] 3/16” DP Steel Floor w/4 Flushmount D-Rings & 12”oc
[-EL01] Add 7-Way RV Plug to Rear Bumper
[-FE05] Weld on Fenders
[-FE06] 1/4” DP HD Weld on Fenders Tandem Axle
[-JA05] 1 Hydraulic Monster Jack™ Includes Front Toolbox
[-JA06] 2 Hydraulic Monster Jacks™
[-JAB1] Upgrade to (1) - Single BULLDOG 10k Jack
[-JAB2] Upgrade to (2) - Dual BULLDOG 10k Jacks
[-JABG] Upgrade to BULLDOG 10k Jacks (Gooseneck Only)
[-LT05] Add LED Reverse Lights
[-LT10] Light Bar w/4 Lights
[-NF01] No Flooring
[-PS00] No Pin Striping
[-RM30] No Ramps No Ramp Pockets
[-SL04] 4 Side Marker 3/4” Bullet Lights, 2 Per Side
[-TB03] Top Riser Toolbox
[-TB04] Full Size Divided Toolbox Upgrade (BP Only)
[-WN12] SuperWinch Talon 12.5 w/Plate & Battery
[-WN18] SuperWinch Talon 18k w/HD Plate & Battery
[-WN95] SuperWinch TS9500 w/Plate & Battery
[-WP04] HD GN Winch Plate (Rec. for 18k Winches)
[0] Cold Weather Wiring Harness (7-Way RV)
[2] 2nd Jack (Bumper Pull)
[4] Plate for Winch
[5] Solar Battery Charger
[6] 6” Taller GN Riser
[C] 12”oc Crossmembers
[E] Rough Oak Floor
[H] Receiver Hitch
[P] 11ga(1/8”) DP Steel Floor w/4 Flushmount D-Rings & 12”oc
[Q] Front Toolbox (Bumper Pull)
[V] Rear Trailer Support Jacks
[X] Bulldog 2-speed Jacks (12,000 lb.)

Parts Guide

Model Part Description Category Part Number
H7 Reflector Tape, Conspicuity R&W BODY 170237
H7 Pintle Eye 3” 66K 4 Bolt,Face Mt. COUPLER 140209
H7 Tailight 6” Oval LED Red Sealed
(Dovetail)
ELECTRICAL & LIGHTS 170216
H7 Bracket Weld-on - 3/8” Safety Chain HARDWARE 180411
H7 Jack 12K Dropleg Pin to Side (BP) JACK 140092
H7 Jack 12K Dropleg SW GN
(Gooseneck)
JACK 140102
H7 Light Kit LED for 6” & 8” Carhauler LIGHTING 170504
H7 Ramp 3” Channel 12”x60” C5&C6 Paris
(Slide-in Ramps)
RAMPS 160205
H7 Ramp, Equip. Hauler UH 31”x66” RAMPS 160202
H7 Weld-on Mtg Kit -10K QRG Torsion SUSPENSION 110250
H7 Tire&Whl 235/17.5 Sngl 8 lug TIRES & WHEELS 130197

Parts Guide Disclaimer: Parts can change based on the options, production date, and production location of the trailer. If there is any doubt about parts fitment please contact a PJ Parts representative with the VIN of the trailer in question.